|
| JCRev (StkFloat T60=1.0) |
| Class constructor taking a T60 decay time argument (one second default value).
|
|
void | clear (void) |
| Reset and clear all internal state.
|
|
void | setT60 (StkFloat T60) |
| Set the reverberation T60 decay time.
|
|
StkFloat | lastOut (unsigned int channel=0) |
| Return the specified channel value of the last computed stereo frame. More...
|
|
StkFloat | tick (StkFloat input, unsigned int channel=0) |
| Input one sample to the effect and return the specified channel value of the computed stereo frame. More...
|
|
StkFrames & | tick (StkFrames &frames, unsigned int channel=0) |
| Take a channel of the StkFrames object as inputs to the effect and replace with stereo outputs. More...
|
|
StkFrames & | tick (StkFrames &iFrames, StkFrames &oFrames, unsigned int iChannel=0, unsigned int oChannel=0) |
| Take a channel of the iFrames object as inputs to the effect and write stereo outputs to the oFrames object. More...
|
|
unsigned int | channelsOut (void) const |
| Return the number of output channels for the class.
|
|
const StkFrames & | lastFrame (void) const |
| Return an StkFrames reference to the last output sample frame.
|
|
virtual void | setEffectMix (StkFloat mix) |
| Set the mixture of input and "effected" levels in the output (0.0 = input only, 1.0 = effect only).
|
|
void | ignoreSampleRateChange (bool ignore=true) |
| A function to enable/disable the automatic updating of class data when the STK sample rate changes. More...
|
|
|
static StkFloat | sampleRate (void) |
| Static method that returns the current STK sample rate.
|
|
static void | setSampleRate (StkFloat rate) |
| Static method that sets the STK sample rate. More...
|
|
static void | clear_alertList () |
| Static method that frees memory from alertList_.
|
|
static std::string | rawwavePath (void) |
| Static method that returns the current rawwave path.
|
|
static void | setRawwavePath (std::string path) |
| Static method that sets the STK rawwave path.
|
|
static void | swap16 (unsigned char *ptr) |
| Static method that byte-swaps a 16-bit data type.
|
|
static void | swap32 (unsigned char *ptr) |
| Static method that byte-swaps a 32-bit data type.
|
|
static void | swap64 (unsigned char *ptr) |
| Static method that byte-swaps a 64-bit data type.
|
|
static void | sleep (unsigned long milliseconds) |
| Static cross-platform method to sleep for a number of milliseconds.
|
|
static bool | inRange (StkFloat value, StkFloat min, StkFloat max) |
| Static method to check whether a value is within a specified range.
|
|
static void | handleError (const char *message, StkError::Type type) |
| Static function for error reporting and handling using c-strings.
|
|
static void | handleError (std::string message, StkError::Type type) |
| Static function for error reporting and handling using c++ strings.
|
|
static void | showWarnings (bool status) |
| Toggle display of WARNING and STATUS messages.
|
|
static void | printErrors (bool status) |
| Toggle display of error messages before throwing exceptions.
|
|
John Chowning's reverberator class.
This class takes a monophonic input signal and produces a stereo output signal. It is derived from the CLM JCRev function, which is based on the use of networks of simple allpass and comb delay filters. This class implements three series allpass units, followed by four parallel comb filters, and two decorrelation delay lines in parallel at the output.
Although not in the original JC reverberator, one-pole lowpass filters have been added inside the feedback comb filters.
by Perry R. Cook and Gary P. Scavone, 1995–2019.
static void stk::Stk::setSampleRate |
( |
StkFloat |
rate | ) |
|
|
staticinherited |
Static method that sets the STK sample rate.
The sample rate set using this method is queried by all STK classes that depend on its value. It is initialized to the default SRATE set in Stk.h. Many STK classes use the sample rate during instantiation. Therefore, if you wish to use a rate that is different from the default rate, it is imperative that it be set BEFORE STK objects are instantiated. A few classes that make use of the global STK sample rate are automatically notified when the rate changes so that internal class data can be appropriately updated. However, this has not been fully implemented. Specifically, classes that appropriately update their own data when either a setFrequency() or noteOn() function is called do not currently receive the automatic notification of rate change. If the user wants a specific class instance to ignore such notifications, perhaps in a multi-rate context, the function Stk::ignoreSampleRateChange() should be called.