Generic Driver API that wraps a codec driver class which has been ported from the Zephyr RTOS (see Codecs/<chip>/ *.h, e.g. WM8904, DA7212, TAS2563, ...). It provides the I2C wire/address from the pin configuration to the driver and calls its begin()/setVolume()/setMute() (or setOutputVolume()/setOutputMute()) methods, so that the chip can be used via the regular AudioDriver API. More...

#include <AudioDriver.h>

Inheritance diagram for AudioDriverZephyrT< T, DefaultI2CAddress >:

Public Member Functions
	AudioDriverZephyrT (uint8_t i2cAddress=DefaultI2CAddress)

virtual bool	begin (CodecConfig codecCfg, DriverDeviceInfo &pins)
	Starts the processing.

T &	driver ()
	Provides access to the wrapped Zephyr driver instance.

virtual bool	end (void)
	Ends the processing: shut down dac and adc.

API_GPIO &	getGPIO ()

virtual int	getI2CAddress ()
	Provides the i2c address.

int	getInputVolume ()

int	getVolume () override
	Determines the actual volume (range: 0-100)

bool	isInputVolumeSupported () override
	Determines if setInputVolume() is supported.

virtual bool	isVolumeSupported ()
	Determines if setVolume() is suppored.

	operator bool ()

virtual DriverDeviceInfo &	pins ()
	Provides the pin information.

virtual bool	setConfig (CodecConfig codecCfg)
	changes the configuration

virtual bool	setI2CAddress (uint16_t adr)
	Defines the i2c address.

bool	setInputVolume (int volume) override
	Defines the input volume (range: 0-100) if supported.

bool	setMute (bool enable) override
	Mutes all output lines.

virtual bool	setMute (bool mute, int line)
	Mute individual lines: only supported for some rare DACs.

bool	setPAPower (bool enable)
	Sets the PA Power pin to active or inactive.

void	setPins (DriverDeviceInfo &pins)

void	setupI2CAddress ()
	If no address is defined in the pins we provide it here.

bool	setVolume (int volume) override
	Defines the Volume (in %) if volume is 0, mute is enabled,range is 0-100.

Protected Member Functions
bool	configInterface (codec_mode_t mode, I2SDefinition iface) override
	Configures the codec (sample rate, bits per sample) for the given I2S setup.

bool	controlState (codec_mode_t mode) override

bool	deinit () override
	Stops the input and output and (if supported) shuts down the codec.

virtual i2c_bus_handle_t	getI2C ()
	Determine the TwoWire object from the I2C config or use Wire.

bool	init (codec_config_t codecCfg) override

int	limitValue (int volume, int min=0, int max=100)

int	mapVolume (int x, int in_min, int in_max, int out_min, int out_max)

Protected Attributes
CodecConfig	codec_cfg

int	i2c_default_address = -1

DriverDeviceInfo *	p_pins = nullptr

int	volume_value = 100

T	zephyr_driver

Detailed Description

template<class T, uint8_t DefaultI2CAddress = 0>
class audio_driver::AudioDriverZephyrT< T, DefaultI2CAddress >

Generic Driver API that wraps a codec driver class which has been ported from the Zephyr RTOS (see Codecs/<chip>/ *.h, e.g. WM8904, DA7212, TAS2563, ...). It provides the I2C wire/address from the pin configuration to the driver and calls its begin()/setVolume()/setMute() (or setOutputVolume()/setOutputMute()) methods, so that the chip can be used via the regular AudioDriver API.

Some chips require additional parameters (e.g. the master clock frequency) for their begin() method: in this case begin() is not called automatically and driver() must be used to set up the chip manually before AudioDriver::begin() is called.

Template Parameters

T	the Zephyr ported codec driver class (e.g. WM8904)
DefaultI2CAddress	the default I2C address of the chip

Author: Phil Schatzmann

Copyright: GPLv3

Constructor & Destructor Documentation

◆ AudioDriverZephyrT()

template<class T , uint8_t DefaultI2CAddress = 0>

AudioDriverZephyrT ( uint8_t i2cAddress = DefaultI2CAddress )

inline

Member Function Documentation

◆ begin()

virtual bool begin	(	CodecConfig	codecCfg,
		DriverDeviceInfo &	pins
	)

inlinevirtualinherited

Starts the processing.

Reimplemented in AudioDriverNAU8325Class, NoDriverClass, AudioDriverCS43l22Class, AudioDriverCS42L51Class, AudioDriverWM8960Class, AudioDriverWM8994Class, AudioDriverLyratMiniClass, AudioDriverCombined, AudioDriverCS42448Class, and AudioDriverWM8978Class.

◆ configInterface()

template<class T , uint8_t DefaultI2CAddress = 0>

bool configInterface	(	codec_mode_t	mode,
		I2SDefinition	iface
	)

inlineoverrideprotectedvirtual

Configures the codec (sample rate, bits per sample) for the given I2S setup.

Reimplemented from AudioDriver.

◆ controlState()

template<class T , uint8_t DefaultI2CAddress = 0>

bool controlState ( codec_mode_t mode )

inlineoverrideprotectedvirtual

Reimplemented from AudioDriver.

◆ deinit()

template<class T , uint8_t DefaultI2CAddress = 0>

bool deinit ( )

inlineoverrideprotectedvirtual

Stops the input and output and (if supported) shuts down the codec.

Reimplemented from AudioDriver.

◆ driver()

template<class T , uint8_t DefaultI2CAddress = 0>

T & driver ( )

inline

Provides access to the wrapped Zephyr driver instance.

◆ end()

virtual bool end ( void )

inlinevirtualinherited

Ends the processing: shut down dac and adc.

Reimplemented in AudioDriverWM8978Class, AudioDriverNAU8325Class, NoDriverClass, AudioDriverWM8960Class, AudioDriverLyratMiniClass, AudioDriverCombined, and AudioDriverCS42448Class.

◆ getGPIO()

API_GPIO & getGPIO ( )

inlineinherited

◆ getI2C()

virtual i2c_bus_handle_t getI2C ( )

inlineprotectedvirtualinherited

Determine the TwoWire object from the I2C config or use Wire.

◆ getI2CAddress()

virtual int getI2CAddress ( )

inlinevirtualinherited

Provides the i2c address.

◆ getInputVolume()

template<class T , uint8_t DefaultI2CAddress = 0>

int getInputVolume ( )

inline

◆ getVolume()

template<class T , uint8_t DefaultI2CAddress = 0>

int getVolume ( )

inlineoverridevirtual

Determines the actual volume (range: 0-100)

Implements AudioDriver.

◆ init()

template<class T , uint8_t DefaultI2CAddress = 0>

bool init ( codec_config_t codecCfg )

inlineoverrideprotectedvirtual

Reimplemented from AudioDriver.

◆ isInputVolumeSupported()

template<class T , uint8_t DefaultI2CAddress = 0>

bool isInputVolumeSupported ( )

inlineoverridevirtual

Determines if setInputVolume() is supported.

Reimplemented from AudioDriver.

◆ isVolumeSupported()

virtual bool isVolumeSupported ( )

inlinevirtualinherited

Determines if setVolume() is suppored.

Reimplemented in NoDriverClass, AudioDriverWM8960Class, AudioDriverCS42448Class, and AudioDriverWM8978Class.

◆ limitValue()

int limitValue	(	int	volume,
		int	min = `0`,
		int	max = `100`
	)

inlineprotectedinherited

make sure that value is in range

Parameters

volume

Returns

◆ mapVolume()

int mapVolume	(	int	x,
		int	in_min,
		int	in_max,
		int	out_min,
		int	out_max
	)

inlineprotectedinherited

◆ operator bool()

operator bool ( )

inlineinherited

◆ pins()

virtual DriverDeviceInfo & pins ( )

inlinevirtualinherited

Provides the pin information.

Reimplemented in AudioDriverCS42448Class.

◆ setConfig()

virtual bool setConfig ( CodecConfig codecCfg )

inlinevirtualinherited

changes the configuration

Reimplemented in AudioDriverCS43l22Class, AudioDriverCS42L51Class, AudioDriverCS42448Class, AudioDriverWM8960Class, and AudioDriverWM8978Class.

◆ setI2CAddress()

virtual bool setI2CAddress ( uint16_t adr )

inlinevirtualinherited

Defines the i2c address.

◆ setInputVolume()

template<class T , uint8_t DefaultI2CAddress = 0>

bool setInputVolume ( int volume )

inlineoverridevirtual

Defines the input volume (range: 0-100) if supported.

Reimplemented from AudioDriver.

◆ setMute() [1/2]

template<class T , uint8_t DefaultI2CAddress = 0>

bool setMute ( bool enable )

inlineoverridevirtual

Mutes all output lines.

Implements AudioDriver.

◆ setMute() [2/2]

virtual bool setMute	(	bool	mute,
		int	line
	)

inlinevirtualinherited

Mute individual lines: only supported for some rare DACs.

Reimplemented in AudioDriverCS42448Class, AudioDriverES8388Class, AudioDriverPCM3168Class, and AudioDriverWM8978Class.

◆ setPAPower()

bool setPAPower ( bool enable )

inlineinherited

Sets the PA Power pin to active or inactive.

◆ setPins()

void setPins ( DriverDeviceInfo & pins )

inlineinherited

◆ setupI2CAddress()

void setupI2CAddress ( )

inlineinherited

If no address is defined in the pins we provide it here.

◆ setVolume()

template<class T , uint8_t DefaultI2CAddress = 0>

bool setVolume ( int volume )

inlineoverridevirtual

Defines the Volume (in %) if volume is 0, mute is enabled,range is 0-100.

Implements AudioDriver.

Member Data Documentation

◆ codec_cfg

CodecConfig codec_cfg

protectedinherited

◆ i2c_default_address

int i2c_default_address = -1

protectedinherited

◆ p_pins

DriverDeviceInfo* p_pins = nullptr

protectedinherited

◆ volume_value

template<class T , uint8_t DefaultI2CAddress = 0>

int volume_value = 100

protected

◆ zephyr_driver

template<class T , uint8_t DefaultI2CAddress = 0>

T zephyr_driver

protected

The documentation for this class was generated from the following file:

src/AudioDriver.h

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ AudioDriverZephyrT()

Member Function Documentation

◆ begin()

◆ configInterface()

◆ controlState()

◆ deinit()

◆ driver()

◆ end()

◆ getGPIO()

◆ getI2C()

◆ getI2CAddress()

◆ getInputVolume()

◆ getVolume()

◆ init()

◆ isInputVolumeSupported()

◆ isVolumeSupported()

◆ limitValue()

◆ mapVolume()

◆ operator bool()

◆ pins()

◆ setConfig()

◆ setI2CAddress()

◆ setInputVolume()

◆ setMute() [1/2]

◆ setMute() [2/2]

◆ setPAPower()

◆ setPins()

◆ setupI2CAddress()

◆ setVolume()

Member Data Documentation

◆ codec_cfg

◆ i2c_default_address

◆ p_pins

◆ volume_value

◆ zephyr_driver