pico-arduino
We just print the test Hallo World every second to the USB console and to Serial1 and Serial2
By default we use the following pins:
- Serial1: UART0 tx (GP0) / rx (GP1)
- Serial2: UART1 tx (GP4) / rx (GP5)
In the example we show how to redefine the pins to use GP12 and GP13.
To test the functionality I am using a YP-05 FTDI
Connections for the YP-05
Before making any connectins, make sure that the jumper is set to 3.3V !
| YP-05 | Pico |
|---|---|
| RX | TX (GPIO 12) |
| TX | RX (GPIO 13) |
| GND | GND |
You can connect with any Termial Emulation using the following settings
- Speed: 115200
- Data Bits: 8
- Parity: None
- Stop Bits: 1
- No Hardware flow control